EAGLE Parts
 |
| audio-pots.lbr |
5 KB |
Submitted by: Warren Young on Jan 18, 2015 |
| Audio potentiometers: ALPS RK27; ALPS RK097 with switch; Panasonic EVJC with either left side mounting hole only or with both holes. |
|
|
| battery.lbr |
4 KB |
Submitted by: Warren Young on Jan 18, 2015 |
| Schematic battery symbols with 0.1" spaced pads on the PCB side, for connection to off-board batteries. One footprint was made for the PPA battery board, and uses 2-pin Molex KK connectors, one vertical, one horizontal-mount. The other is currently used on the PIMETA v2 and shows as two battery symbols in the schematic, with two pairs of pads on 0.1" centers on the PCB, for connection to dual off-board 9 V batteries. The PIMETA v2 puts these batteries in series, but the connections aren’t hard-wired in the library, so you can use it for parallel batteries instead. |
|
|
| buffers.lbr |
4 KB |
Submitted by: Warren Young on Jan 18, 2015 |
NatSemi LMH6321 in PSOP-8
obsolete (alas!) Elantec EL2001/2002 in DIP-8 |
|
|
| capacitors.lbr |
6 KB |
Submitted by: Warren Young on Jan 18, 2015 |
Various multi-footprint caps, used to offer choice of parts in various PCB designs I have offered through the years:
• dual thru-hole/SMT PCM-5/7343 footprint (C5 in PIMETA v2)
• dual thru-hole/SMT PCM-5/1206 (PIMETA v2 bypass caps)
• combo PCM-5, -7.5, -10 and -12.5 thru-hole plus 1210 SMT cap (C1 in PIMETA v2)
• combo PCM-5, -7.5, -10, -12.5 and -15 plus 1210 SMT cap
• combo PCM-7.5, -10, -12 and -15 cap |
|
|
| cirrus-dar.lbr |
14 KB |
Submitted by: Frank Echanique on Jan 18, 2015 |
| Cirrus Logic Digital Audio Interface Receivers CS8412/CS8413/CS8414/CS8416 |
|
|
| con-berg-edit.lbr |
3 KB |
Submitted by: Angus Logan on Jan 18, 2015 |
| Berg USB B-type socket with holes for a ground connection |
|
|
| crd.lbr |
3 KB |
Submitted by: Warren Young on Jan 18, 2015 |
| 1N5283 – 1N5314 current regulating diodes |
|
|
| dbridge.lbr |
2 KB |
Submitted by: Warren Young on Jan 18, 2015 |
| W005G - W10G bridge rectifiers |
|
|
| diodes.lbr |
3 KB |
Submitted by: Warren Young on Jan 18, 2015 |
| “Dual diodes.” One footprint I used in my STEPS and YJPS power supply boards to allow parts choice of diodes in the TO-220 or barrel packages, up to DO-201 size. The other was created for the PINT and is presently used in the PIMETA v2, which allowed barrel diodes up to DO-41 plus SMT diodes like the common S1A on the bottom side of the board. |
|
|
| digi-pots.lbr |
5 KB |
Submitted by: Warren Young on Jan 18, 2015 |
| Digital audio pots. Crystal CS3310 and Burr-Brown PGA-2310 and 2311 in DIP-16 and SO-16 wide. |
|
|
| fuse2.lbr |
3 KB |
Submitted by: Warren Young on Jan 18, 2015 |
| A pair of Keystone 3521 fuse clips arranged to hold a 5×20 fuse. |
|
|
| heatsinks.lbr |
3 KB |
Submitted by: Warren Young on Jan 18, 2015 |
| PCB-only outline for Aavid-Thermalloy 531 series heatsink |
|
|
| inductor-panasonic.lbr |
7 KB |
Submitted by: Warren Young on Jan 18, 2015 |
| Panasonic ELF line of AC line filters (common-mode chokes). Types 290, 450, 650, 850, 16M, 15N, 17N and 21V included. |
|
|
| jumpers.lbr |
3 KB |
Submitted by: Warren Young on Jan 18, 2015 |
| 3 SMT pads arranged for use with 1206 size resistors, for selection of two different current paths. One variant has the resistor symbols in a T configuration, the other in a Y configuration. |
|
|
| microchip.lbr |
21 KB |
Submitted by: Warren Young on Jan 18, 2015 |
| Microchip 6-pin, 8-pin and 14-pin PIC microcontrollers: PIC10F200, PIC10F202, PIC10F204, PIC10F206, PIC10F220, PIC10F222, PIC12F508, PIC12F509, PIC12F510, PIC12F629, PIC12F635, PIC12F675, PIC12F683, PIC16F505, PIC16F506, PIC16F610, PIC16HV610, PIC16F616, PIC16HV616, PIC16F630, PIC16F636, PICF676, PIC16F684, and PIC16F688. Available in DIP, SOIC and SOT-23 packages only. |
|
|
| molex-kk.lbr |
6 KB |
Submitted by: Warren Young on Jan 18, 2015 |
| Molex KK series keyed connectors. 2, 3 and 4 pin versions, both straight and right-angle styles. Additionally, there is a special part made for the PIMETA v2’s IL/IR/IG connector. You could use it with any audio circuit. |
|
|
| mosfet-drivers.lbr |
2 KB |
Submitted by: Warren Young on Jan 18, 2015 |
| Micrel MIC5018 high-side MOSFET driver |
|
|
| opamps.lbr |
6 KB |
Submitted by: Warren Young on Jan 18, 2015 |
| DIP-8/SOIC-8 dual footprints for the dual and single op-amps on the PIMETA v2; Linear Technology LT1206 op-amp in TO-220-7; generic op-amps, differing only in silkscreen style from the ones in the standard EAGLE libraries. |
|
|
| power-mgmt.lbr |
2 KB |
Submitted by: Warren Young on Jan 18, 2015 |
| On Semi MC33340 and 42 NiCd/NiMH battery charge controllers in DIP-8 |
|
|
| reference.lbr |
3 KB |
Submitted by: Warren Young on Jan 18, 2015 |
| LM329, LM336 and LM385 voltage references |
|
|
| regulators.lbr |
4 KB |
Submitted by: Warren Young on Jan 18, 2015 |
| LM3480, LP298x, and LP2992 linear regulators in SOT-23 |
|
|
| resistors.lbr |
6 KB |
Submitted by: Warren Young on Jan 18, 2015 |
Various multi-footprint resistors, used to offer choice of parts in various PCB designs I have offered through the years:
• dual thru-hole/SMT 5 mm/1206 footprint (R11 in PIMETA v2)
• dual thru-hole/SMT 7.5 mm/1206 (most Rs in PIMETA v2)
• dual thru-hole/SMT 10 mm/1210 (RCCS in PIMETA v2)
• dual thru-hole/SMT 7.5 mm/1206 with outer test points
• combo resistor/switch/cap (R4 in PIMETA v2)
|
|
|
| side-led.lbr |
3 KB |
Submitted by: Warren Young on Jan 18, 2015 |
| 1208 size SMT side-shining LED. Designed for Lite-On LTST-S320 series, but I believe I’ve seen competitive parts with similar layouts. |
|
|
| switch2.lbr |
2 KB |
Submitted by: Warren Young on Jan 18, 2015 |
| Two wire pads with dashed line between, for off-board wired SPST. |
|
|
| smt-test-points.lbr |
2 KB |
Submitted by: Warren Young on Jan 18, 2015 |
| Keystone 5015-5018 wire loop SMT test points |
|
|
| tle2426.lbr |
4 KB |
Submitted by: Warren Young on Jan 18, 2015 |
| TLE2426 in DIP-8, SO-8, and TO-92 packages |
|
|
| trafo-amveco.lbr |
5 KB |
Submitted by: Warren Young on Jan 18, 2015 |
| Amveco board-mount toroids, 5, 7, 10, 15, 25 and 35 VA models; plus, the combined 5-25 VA footprint from the YJPS. |
|
|
| transistors.lbr |
12 KB |
Submitted by: Warren Young on Jan 18, 2015 |
2N5457-59, 2N5484-86 and PN4391-3 N-channel JFETs in TO-92
2N7000 and 2N7002 N-channel MOSFETs in SOT-23 and TO-92
IRF73xx, IRF7907, IRF8910 and IRF9910 N-channel dual MOSFETs in SO-8 (standard pinout)
IRFL* series SOT-223 P-channel MOSFETs
IRLL* series SOT-223 N-channel MOSFETs |
|
|
| wirepad2.lbr |
9 KB |
Submitted by: Warren Young on Jan 18, 2015 |
| A version of the EAGLE-supplied library with additional sizes |
|